Short answer: Cisco’s last date of support for the Catalyst 2960-X family is 31 October 2027, roughly 12 months from now. Cisco names the Catalyst 9200L as the direct replacement for most 2960-X models. Plan, quote and schedule the swap now, because after that date Cisco no longer provides vulnerability and security support for these switches. You can compare Cisco switches at Cloud Appliances UK and our engineers will check your replacement list before you order.
By Eric Olczyk, Cisco Sales Specialist, Cloud Appliances UK. Cisco and Meraki specialists since 2008. Last reviewed 2 November 2026.

Cisco’s end-of-sale and end-of-life notice for the Catalyst 2960-X product family (notice EOL13603) sets these dates.
Source: Cisco end-of-sale and end-of-life announcement for the Catalyst 2960X product family. The notice covers the 2960-X family; check your exact part number against Cisco’s notice before you plan, as the page does not give a separate date set for every variant.
What “end of support” means in plain terms: after 31 October 2027 you cannot raise a Cisco support case for the switch and Cisco will no longer provide vulnerability or security fixes for it. The switch will keep forwarding traffic, but you will be running an unsupported network device at the edge of your estate.
Yes. It has been end of sale since 31 October 2022, with the last ship date on 30 January 2023. Software maintenance releases stopped on 31 October 2023, so the only fixes now are security fixes, and those stop on 31 October 2027. The end of service contract renewal date, 29 January 2027, matters for budgeting: if you rely on a support contract, you will not be able to renew it after that date.
Cisco’s own migration table points most 2960-X models to the Catalyst 9200L. Examples from the notice:

Some 2960-X part numbers have no direct replacement listed, and the 48-port low-power PoE variants point to Cisco’s migration options section. If your estate includes those, do not assume a like-for-like swap; have the part numbers checked.
Two practical notes from our engineers:
No. Most UK organisations phase it. A sensible order is: switches that carry the most PoE load or business-critical sites first, switches in closets with no spare space last, and any switch with a known fault ahead of both. Standardise on one replacement model per site where you can, so spares and configuration templates stay simple.
Cisco notes that customers may be able to buy through its certified refurbished equipment programme until the last date of support. Buying a 2960-X now gives you a switch with, at most, 12 months of security support left. Buying unofficial or grey-market stock is a bigger risk, because warranty and licence entitlement can be missing. Cloud Appliances UK sources Cisco equipment through official channels only, so what you buy is genuine hardware you can register and support.
Yes. Catalyst 9000 family switches use Cisco’s subscription-based software licensing, so a replacement quote needs the right licence level and term as well as the hardware. The most common ordering mistake we see is hardware without the licence or the stack kit. Our guide on how to check a Cisco quote before you order lists what to look for. The detailed licence tiers are covered in a separate guide.

Send your list through our online Cisco and Meraki quote. An engineer checks your part numbers, licences and optics and confirms lead times, usually within one working day. Eligible in-stock orders placed before 2pm can ship for next-business-day delivery in England. Delivery times are estimates, not guarantees. We hold ISO 9001, ISO 27001 and Cyber Essentials Plus, and we are a Cisco Premier Integrator.
The last date of support is 31 October 2027, per Cisco’s end-of-sale notice.
Yes. End of sale was 31 October 2022, and the last ship date was 30 January 2023.
For most models, Cisco names the Catalyst 9200L, for example C9200L-24P-4G for the WS-C2960X-24PS-L.
No. It keeps forwarding traffic, but Cisco stops vulnerability and security support, so it becomes an unsupported device.
Only until the end of service contract renewal date, 29 January 2027.
Yes. Catalyst 9000 switches need an appropriate software licence, which should be on the same quote as the hardware.
Yes. Send it through our online quote form and a Cloud Appliances UK engineer will review it.
Have a list of 2960-X switches to replace? Request a verified Cisco switch quote and we will map each model to its replacement, check licences and confirm availability. Related reading: Meraki MX vs Cisco Secure Firewall, 7 best Cisco routers for UK branch offices, and Cisco smart switches.