Quick answer: Buy the Cisco Catalyst 9200 for a stable branch or small office that needs reliable PoE+ access switching on a budget. Buy the Catalyst 9300 (or 9300X) when you need 90W UPOE+, multigigabit ports, faster stacking, StackPower or hardware IPsec. Consider the newer Catalyst C9350 Smart Switch for a fresh campus build that wants 1.6 Tbps stacking and 100G uplinks, but remember it only stacks with other C9350 switches. Cloud Appliances UK, a Cisco and Meraki specialist since 2008, will check any switch shopping list through its online Cisco and Meraki quote service.
Written by the technical team at Cloud Appliances UK, a Cisco and Meraki specialist partner supplying UK businesses since 2008. Reviewed 16 November 2026.
| Question | Catalyst 9200 / 9200L | Catalyst 9300 / 9300X | Catalyst C9350 |
|---|---|---|---|
| Best for | Branch and small office access | Campus and growing access layer | New campus builds, AI-era edge |
| Stacking | 160 Gbps (9200), 80 Gbps (9200L), none on 9200CX | 480 Gbps (9300), 1 Tbps (9300X) | 1.6 Tbps, new stacking design |
| Top PoE per port | PoE+ 30W (UPOE 60W on 9200CX mGig) | UPOE+ 90W | 90W PoE on 48 ports |
| Uplinks | Modular on 9200, fixed on 9200L | Modular, up to 100G on 9300X | 4x100G uplink modules |
| Hardware IPsec | No | 9300X only, up to 100G (HSEC key needed) | Check ordering guide |
| Cloud management | Meraki dashboard supported | Meraki dashboard supported | Meraki cloud mode on IOS XE 17.18.2 |
Sources: Cisco Catalyst 9200 data sheet (updated 1 September 2026), Cisco Catalyst 9300 data sheet (updated 21 October 2026) and Cisco’s March 2026 smart switches presentation.
All three are fixed, stackable access switches that run Cisco IOS XE. The Catalyst 9200 is the entry model of the Catalyst 9000 family, aimed at cost-effective branch access. The Catalyst 9300 is Cisco’s lead stackable enterprise access platform, and the 9300X adds a newer chip with 100G IPsec in hardware. The C9350 Smart Switch is the newest generation, built on Cisco Silicon One with a new stacking architecture. Cisco’s own 2026 roadmap material states there are no plans to end-of-sale any Catalyst 9000 switches, so choosing between them is about fit, not rescue timing.
| Specification | Catalyst 9200 (modular) | Catalyst 9300 (modular) |
|---|---|---|
| Stacking bandwidth | 160 Gbps (StackWise-160) | 480 Gbps (StackWise-480); 9300X 1 Tbps |
| Switching capacity, 48-port PoE model | 176 Gbps | 256 Gbps |
| Memory (DRAM) | 4 GB (2 GB on 9200L) | 8 GB (16 GB on 9300X) |
| Packet buffer, gigabit models | 6 MB | 16 MB |
| ACL entries | 1,600 | 5,120 (8,000 on 9300X) |
| Max PoE budget quoted by Cisco | 1,440W of PoE+ | Higher; UPOE+ 90W on 48 ports in a standalone switch |
| StackPower | No | Yes (modular uplink models) |
| MACsec | AES-128 (AES-256 on 9200CX) | AES-256 on all models |
| Warranty and support | Confirm hardware warranty and support entitlement for your exact part number on the quote | |
All figures are from Cisco data sheets. Where Cisco measures with 64 byte packets, real results depend on the features you switch on.

Stacking joins up to eight switches into one logical switch. The 9200 stacks only with other 9200 switches of the same type, and fixed-uplink 9200L models cannot stack with modular 9200 models. The 9300 and 9300X can mix at 480 Gbps. The C9350 uses a different, newer stacking design that Cisco says is unique to that series, and reseller analysis of Cisco documentation reports it stacks only with other C9350 models. Check the ordering guide before planning a mixed estate.
Do the sum before you pick. Cisco’s own note shows 24 PoE+ ports at 30W need 720W, and 48 ports need 1,440W. A 9200 with two 1KW supplies reaches 1,440W, which covers 48 PoE+ ports. If you plan 60W UPOE or 90W UPOE+ endpoints, the 9300 range is the practical choice because it supports up to 48 ports of 90W UPOE+ in standalone mode.
The 9200 offers 1G, 10G, 25G or 40G modular uplinks depending on model, while the 9200L has fixed uplinks. The 9300 adds 25G and 40G modules, and the 9300X adds 100G uplinks and up to 48 multigigabit 10G ports. The C9350 takes 4x100G uplink modules.
Every new 9200 and 9300 order needs a software subscription. You can buy the long-standing Cisco DNA subscriptions (Essentials or Advantage, 3, 5 or 7 year terms) or the newer Cisco Networking Subscription with Switching Essentials and Advantage tiers, which has a standard minimum term of 36 months. Cisco lists unified licensing support on releases 26.2.1, 17.18.5 and 26.1.3. Both families can also be managed from the Meraki dashboard, with Meraki licences sold on 1 to 10 year terms. Because licence choices change renewals and budgets, have them checked at quote stage.
| Your situation | Choose | Do not choose it if |
|---|---|---|
| Branch or small office, 24 to 96 gigabit PoE+ ports, stable growth | Catalyst 9200 or 9200L | You need UPOE+, 480 Gbps stacking or StackPower |
| Replacing 2960-X or 3850 in an office that will keep growing | Catalyst 9300 | Budget is the only driver and needs are modest |
| Wi-Fi 6E/7 estate with 2.5G, 5G or 10G access points | 9200 PXG, 9300 or 9300X multigigabit models | You only have gigabit access points |
| Need 100G uplinks, hardware IPsec or app hosting capacity | Catalyst 9300X | You will never use those features |
| New campus build with 90W PoE and 100G uplinks | Catalyst C9350 | You must stack with existing 9300 switches |

If you are still on a Catalyst 2960-X, read our 2960-X end of support guide first, because the 9200 and 9300 are its main successors.
No end-of-sale has been announced for either. Cisco’s March 2026 presentation carries a statement of direction that reads “No plans to EoS / EoL any Catalyst 9000 switches”. An independent UK reseller listing also reported no 9300 switch hardware end-of-sale notice as of 8 October 2026, and described the C9350 as an upgrade path for select models rather than a replacement notice. Statements of direction can change, so check Cisco’s lifecycle pages for your part number before a large order.
Our 12-point Cisco quote checklist covers these items in detail. Prices also moved on 7 November 2026, as we explain in our guide to Cisco’s November 2026 price increase, so ask for a dated, re-validated quote.
Cost depends on port count, PoE class, uplinks, power supplies, the licence tier and term, and Cisco support. As a rule the 9200 costs less than the 9300, and the 9300X and C9350 sit higher. We do not publish a single price because list prices and discounts change, so ask for a current quote.
Cloud Appliances UK has supplied Cisco and Meraki hardware, licences and technical support since 2008. We are a Cisco Premier Integrator and Select Partner, hold Cisco’s Environmental Sustainability Specialisation, and are certified to ISO 9001, ISO 27001 and Cyber Essentials Plus. We source Cisco equipment only through official channels, our team provides design, configuration and network management, and eligible in-stock orders placed before 2pm can ship next business day in England (see delivery information).
For most UK branch offices, the Catalyst 9200 is enough. For a growing office or campus with Wi-Fi 6E or 7, UPOE+ devices or more than a few stacked switches, choose the Catalyst 9300 or 9300X. Look at the C9350 only for a new build where you can standardise on it. Browse the Cisco switch range or send us your list.
The 9300 offers faster stacking (480 Gbps against 160 Gbps), more memory and buffer, UPOE+ 90W, StackPower and AES-256 MACsec on all models. The 9200 is the lower-cost branch option.
It is more capable, not always better for you. If your needs are stable gigabit PoE+ access, the 9200 does the job at lower cost.
No. Cisco’s data sheets list stack members only within each family, so a 9200 stacks with other 9200 switches.
Yes, at StackWise-480 speeds, with the same licence level. Mixed stacking with the higher-scale 9300 models is not supported.
No end-of-sale has been announced for the 9300 hardware, and Cisco’s statement of direction says there are no plans to end-of-sale Catalyst 9000 switches.
Only for a new standardised build. It stacks with other C9350 switches only, so keep the 9300X for expanding an existing 9300 estate.
Yes. Cisco lists Meraki dashboard management for both, including -M part numbers, but check support for your exact model and release.
Yes. Send it through our quote form and an engineer will check models, licences, modules, power and delivery.
Not sure which switch fits? Send your switch list to Cloud Appliances UK for a free technical check and ETA.